Rear strut bar made by Tuckin99 of Japan for the 2016+ ND MX-5. Widely used in automotive tuning, a strut tower bar will connect the left and right sides of the vehicle together to stiff-en the car up and improve handling. This bar is for the rear. Please note that during installation trimming of the OEM trunk liner is required for install. Learn More

The Tein Mono Sport is a performance coilover that is designed especially for the 2016+ ND MX-5. The settings are made for cars often on circuit and for those that enjoy sport driving. It has a mono-tube structure (to be stiffer and have better feeling of the road surface) and the kit is complete with top mounts. Check out our installation instructions for coilover suspension! NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More

The Tein Flex Z is a budget coilover for those who want to have a perfect ride height (without any sacrifice on ride quality) on their ND and also be able to adjust damping. It’s a high quality part made in Japan with high quality standards. It has a twin-tube structure (for low resiliency and securing sufficient stroke) and the kit is complete with top mounts. It’s also possible to replace the shock only when it’s worn out. Check out our installation instructions for coilover suspension! SHIPS STRAIGHT FROM JAPAN, MINIMAL WAIT TIME NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More

Rear Rigid Collars manufacturer and patented by Spoon for the ND Mazda MX-5 (2016+). It is a full set (front and rear) made of 24 pieces. These pieces install between the body and subframe to reduce the little gap that will cause low-level vibrations and reduce overall rigidity of the car. The Rigid Collars will : -Reduce pull-up/oscillation during engine start up -Vibration is reduced during idling -Straight line stability is improved -Steering adjustment is reduced -Rolls smoother & reduce fatigue during driving In other words, it'll improve the ride greatly. Please note that photo is not the actual product, but a rendition of it. Learn More

4 point roll cage by Saito of Japan for the ND (2016+) MX-5 Miata (Soft Top). This roll cage will not only provide a healthy amount of rigidity to the ND body, it will also make your Miata safer in the event of a roll. The standard kit is a 4 point setup, with optional add on bars available. The kit is also available in three different materials to fit a variety of budgets. The roll bar comes unassembled without pads.

Disclaimer : Please be advised that this item has correct pricing for shipping within the lower 48 states of the United States & Canada (BC, AB, SK, MB, ON, QC & NB)

If an order is submitted with a shipping address outside of the above locations, we will need to confirm the shipping cost on a case-by-case basis. We recognize the inconvenience this may pose and appreciate your understanding, as the size of the box for this product is extremely big, it is impossible to provide live international shipping rates.

For customers residing outside the above locations who are interested in this product, we suggest that you send us an email including your full address so we can estimate the total cost to your destination.

Compliance Notice : Important Safety & Compliance Notice

This roll bar uses bolt-on mounting points and is approved for road and track use in Japan. However, motorsport and track regulations vary by country and sanctioning body, and this product may not meet requirements outside of Japan.

For customers outside Japan, this roll bar should be considered primarily for cosmetic and chassis rigidity purposes only, unless compliance is confirmed with the relevant track or organization prior to purchase.

Due to the nature of this product, all sales are final. Returns, exchanges, or refunds are not accepted.

By purchasing, you acknowledge and accept these terms.

Learn More

High performance spring kit for the ND (2016+) Miata made by RS-R. Made of a metal blend proprietary to RSR, these springs are very strong and will lower approximately 35~30mm front and rear. Learn More

Sports i coilover kit by RS*R of Japan for the ND (2016+) Miata. This kit is designed to be a superb street use kit with the occasional track day or autocross event. This highly adjustable kit features matched Ti2000 springs and mono-tube dampers for a ride that is both comfortable and sporty. Please note that pictures are generic coilovers from RS*R, not the actual item. NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More

Sports-i suspension kit made by RSR for the 2016+ ND MX-5. This kit has the same great features of the normal Sports i kit and adds pillow ball mounts. The pillow ball mounts will allow you to feel more out of your steering and suspension setup that will help during spirited driving. Please note that pictures are generic coilovers from RS*R, not the actual item. Check out our installation instructions for coilover suspension! NO SHIPPING METHOD AVAILABLE : Due to recent air shipping regulations, we cannot ship this product. If regulations change or if we find shipping method, we will show product as available to order again. Learn More

Lowering spring kit for the ND (2016+) MX-5 made by RS*R. Made of a metal blend proprietary to RSR, these springs are very strong and will lower approximately 35~30mm front and rear. Learn More