Complete TRA Kyoto (Pandem) Rocket Bunny Aero Kit & Wide Fender Kit for the 2016+ ND Miata. As shown at the 2016 Tokyo auto salon, this kit will totally change the look of your MX-5! Not only will you have a racing appearance front and rear with the included front lip and rear lip, but you’ll also have an extra clearance for both front and rear wheels to run very wide setup. This kit includes the following components: -Front lip -Front and rear fender flares -Rear skirt -Rear GT Wing (Optional) Learn More

Rear fender lip by RS Factory Stage for ND (2016+) MAzda Miata/MX-5. Rear fenders on the ND Miatas are designed to sit flush with stock wheels and tires. When slightly wider tires are installed onto the vehicle they it tends to stick out in just the very back giving it a unbalanced feel. Unlike many universal overfenders, they don't flow with the body lines of the vehicle. Made specifically for the ND roadster, function is of course a must, but it has been designed to become integrated with the surrounding body panels. From the rear, once installed it gives the body line a more square aggressive look and allows wider wheels to sit flush. Installed on the the endurance racing 88 Murakami Motors ND, these fenders are used in the professional racing world and have been proven to be durable and functional. A must for those planning on upgrading wheels and tires to a wider set. Learn More

This wide fender kit is made by Rallybacker for the 2016+ ND MX5 Miata. It provides extra clearance in front and rear fenders for wider wheels and bigger tires. It'll sure help with clearance of wide wheels and meaty tires and still follows the aggressive lines of the car.

Please note that the option for hand nut riveter is for a tool that will help you install the nuts cleanly onto the body and it'll include the nuts as well. If you don't choose this option, you'll need to use M5 bolts & nuts.

Confirmed fitment (1) : Front 18x9.5J +15 and Rear 18x10.5J +2 & 5mm spacer.
Tires on the demo car are : Front 215/35/18 and Rear 225/35/18.

Confirmed fitment (2) : Front 17x9.0J +26 And Rear 17x9.0J -12 Learn More

Front Fender Ducts made by Odula for the 2016+ ND MX-5 Miata. Since the inside of the front fender/wheel arch tends to have positive pressure, installing this piece will reduce resistance by releasing the pressure. It’ll lower the heat in the wheel arch and drop the temperature of the break pads, making them last longer. This piece has been tested in endurance racing (Super Taikyu) and proven to help performance of the car under heavy use. Learn More

Front fenders made by Garage Vary for the 2016+ ND MX-5 Miata. They provide small extra clearance (+3mm), but they are mainly made to provide extra venting and being light weight. Another benefit is that they don’t require to be rolled. Learn More

Garage Vary Rear Blister Fenders for the ND (2016+) MX-5 Miata. If you’ve been looking to add a noticeable increase in width to the rear end of your ND – check out these Blister Fenders! These Blister Fenders provide an extra 9mm of width per side, allowing for chunkier or more aggressive wheel setups. Garage Vary has modelled these to not interfere with the factory Blind Spot Monitoring system, so you can keep the safety features of your car in place. Please note installation of these Fenders will involve drilling into the rear quarter panels of your car, and that these Fenders are only compatible with the factory rear bumper. Aggressively stylise and change the presence of your car on the road! Learn More