Oil Cooler Kit made by Leg Sport for the ND (2016+) MX-5 Miata. This kit will not affect the water temperature as the core is not placed in front of the radiator! It'll help keep the engine temperature lower during hot heat circuit sessions. Learn More

High performance header by Leg Motor Sport for the 2.0L ND (2016+) Mazda Miata/MX-5. Emissions legal 200 cpsi high flow cat integrated in to the 4-1 design. Made with high quality 42.7 mm diameter piping, users can expect gains up to 5hp and 0.5 torque and peak torque levels reaching 1000 rpms higher than stock (without ECU tuning). This all leads to smoother and better acceleration. A simple mod for big gains. It'll fit on both Manual Transmission (MT) and Automatic Transmission (AT) vehicles. Learn More

High performance header by Leg Motor Sport for the 1.5L ND (2016+) Mazda Miata/MX-5. Emissions legal 200 cpsi high flow cat integrated in to the 4-1 design. Made with high quality 42.7 mm diameter piping, users can expect gains up to 5hp and 0.5 torque and peak torque levels reaching 1000 rpms higher than stock (without ECU tuning). This all leads to smoother and better acceleration. A simple mod for big gains. It'll fit on both Manual Transmission (MT) and Automatic Transmission (AT) vehicles. Learn More

Radiator Cap made by Koyo in Japan for the NA, NB, NC & ND MX-5. It adds a nice red touch to the engine bay. Learn More

Super Intake System (Air Groove) for the ND (2016+) Miata (1.5L and 2.0L engine) made by legendary tuning shop Knight Sports. This intake system will provide a faster acceleration, lower air intake temperature, a bit more engine noise and awesome look to your engine bay. Learn More

The Knight Sports Oil Cooler Kit was designed especially for the ND (2016+) MX-5 Miata (1.5L and 2.0L engine compatible). It fits in front of the OEM radiator and will provide an oil temperature that is about 10 degrees lower than the water temperature on all ranges. Learn More

New version of the magnetic drain bolt by Project Kics for ALL YEARS Mazda Miata/MX-5. A very important part that is often overlooked but is essential for engine health. Designed so that the magnets don’t interfere with any of the engine components but still strong enough to capture any metal fragments that may make its way into the oil. Made from light alloy and finished with a heat resistant paint, It can withstand the high temperatures of the oil to insure protection during the most crucial times. This drain plug is a great way to check on engine health when draining the oil and will also help prevent a early issue from escalating into something worse. Learn More

Active hood delete cover produced by Karvonic (formerly Carbonic) Japan for the 2016+ ND Mazda MX-5 Miata. The Karvonic Active Hood Cover is a pair of covers designed to remove the troublesome active hood actuators on the ND Miata that tend to fail causing an expensive repair. Karvonic's solution is the Active Hood Covers, which are twill carbon fiber brackets that cover the hole left by removing the actuators. The design incorporates an attachment point for the harness and cable ties are supplied. Carbonic also provides replacement black finish bolts for a quick installation. This product requires removal of hood actuators (airbags). It CANNOT be used if those pieces are not removed. Recommended to be paired with Zeromotive Active Hood Canceller. Learn More

Gorgeous rear section exhaust made by Kakimoto Racing of Japan for the 2016+ ND Miata. The Class KR lineup is designed to increase power without raising sound levels to an unreasonable level. The muffler has dual tips that are finished in a titanium burnt blue color with a slash design. Learn More