Dual Middle Connecting Bar and Windshield Bar made by Saito for the NA (1989-1997) and NB (1998-2005) MX-5 Miata. These will fit onto their 4-Point Roll Cage, but can also be fitted (do it yourself, requires welding) onto other models of roll bars. It’s available in aluminum or chromoly material. It’s made to connect the windshield area (bolted-on) to the roll bar for extra rigidity. Learn More

Saito Rollbars are the most popular tuners choices in Japan. This roll cage is made for NA & NB (1989-2005) MX-5 Miatas and available in steel, aluminum and chromoly. Material choice will depend if you want lower weight or if it’s not a matter. These roll bars are first made to increase vehicle rigidity. It is designed to overcome the deformation and torsion of body when hard cornering. They are designed mainly to be a bracing for the vehicle and not a safety device (still, solid enough to handle the weight of the vehicle). The roll bar comes unassembled without pads. Black color is the only available option now.

Disclaimer : Please be advised that this item has correct pricing for shipping within the lower 48 states of the United States & Canada (BC, AB, SK, MB, ON, QC & NB).

If an order is submitted with a shipping address outside of the above locations, we will need to confirm the shipping cost on a case-by-case basis. We recognize the inconvenience this may pose and appreciate your understanding, as the size of the box for this product is extremely big, it is impossible to provide live international shipping rates.

For customers residing outside the above locations who are interested in this product, we suggest that you send us an email including your full address so we can estimate the total cost to your destination.

Compliance Notice : Important Safety & Compliance Notice

This roll bar uses bolt-on mounting points and is approved for road and track use in Japan. However, motorsport and track regulations vary by country and sanctioning body, and this product may not meet requirements outside of Japan.

For customers outside Japan, this roll bar should be considered primarily for cosmetic and chassis rigidity purposes only, unless compliance is confirmed with the relevant track or organization prior to purchase.

Due to the nature of this product, all sales are final. Returns, exchanges, or refunds are not accepted.

By purchasing, you acknowledge and accept these terms.

Learn More

68 Degrees C (Low Temperature) Thermostat made by SARD Racing for NA8 (1994-1997) and NB8 (1998-2005) Mazda Miata/MX-5. The goal of this piece is to prevent power loss under high engine load. It has quick response to the variation in the cooling of the water temperature to provide more linear control over the cooling water flow rate. Learn More

SARD fuel regulator offers appropriate fuel pressure for high-performance application. SARD fuel pressure regulator also allows an increase of factory injector discharge rate by configuring fuel pressure. Learn More

-Powerful magnet -Catches iron powder/debris -Only available for NA (1989-1997), NB (1998-2005), NC (2006-2015) & ND (2016+) MX-5 Miata Learn More

SARD’s take on the racing oil filter is to bring the very best to the industry. It’s available for the NA & NB MX-5 Miata (1989-2005). What makes it unique is that it’s using Neodymium magnets (world’s strongest magnets) inside of the filter to make sure absolutely no find metal powder/debris goes through the engine. Learn More

Racing Catalytic Converter made by SARD for the NA (1989-1997) and NB (1998-2005) MX-5 Miatas. This catalyzer will allow a much better flow than the OEM one without polluting like a straight pipe. It brings high response and more power than when using the OEM piece. Main piping and flanges are matching with the OEM ones so that no modification are needed when installed onto your vehicle. Disclaimer : For Left Hand Drive (LHD) vehicles, it is possible that the flange angles from the catalyzer does not match the header/connecting pipe and will require small modification (easy for any muffler shop). We cannot accept returns due to angle difference in flange. Learn More

Subtle duckbill spoiler made by Shinkai Racing from high quality FRP for the 1998 to 2005 MX-5 Miata. It is a very tight fitment that can be installed as-is and look pretty awesome with almost impossible-to-see gap. It adds that subtle yet aggressive touch the rear end of the vehicle needs. It can also be molded to the trunk for an even nicer look. Please note that there might be an extra fee to ship this product to some countries due to Japan Post EMS size limitations. Read more.

Learn More

As your NA/NB (1989-2005) Roadster ages, the floor pan of the vehicle can deteriorate from road contact, deformation, and rust. The Shinkai Floor Protection Plates were designed to help alleviate this. The 2mm thick steel plates help increase body rigidity by stiffening the chassis of vehicle. The steel construction of the floor plates adds ample protection against future deformation and acts like a skid plate for the body of the car. The Shinkai Floor Protection Plates are riveted and welded in place to the frame rails of the vehicle and feature an anti-rust black zinc chromate finish. The Shinkai Floor Protection Plates are a great addition to revitalize the feel of the NA/NB Roadster. Learn More